Round Straight Aluminum Direct Burial
Pole Shaft
Constructed of seamless extruded 6063 Aluminum Alloy tube per ASTM B221 requirements. Poles have Ground Lug welded inside across from hand hole. Hand Hole is 3”x5” and has a reinforced frame.
Embed Detail
Direct Burial poles over 6” diameter will be partially flattened at the bottom side into an anti-rotational oval cross section. Wire access will be provided 24” below ground level line. Soil conditions vary by site. Foundation requirements should be determined by structural engineer with knowledge of jobsite soil conditions.
Powder Coating
All poles are sandblast prior to painting, Powder coat is applied to a minimum of 3 millimeters and baked at 400 ºF temperature. CL-RSADB come with (3) three years warranty.
Hand Hole Cover and Pole Cap
CL-RSADB come with Aluminum Removable Pole Cap for side mount poles, Cast Hand Hole Cover are provided with Internal Bridge Support and are powder coated to match pole.
Cat # : Round Straight Aluminum Direct Burial (CL-RSADB)
Height :
- 8’ (8)
- 10’ (10)
- 12’ (12)
- 14’ (14)
- 16’ (16)
- 18’(18)
- 20’ (20)
- 25’ (25)
Pole O.D :
- 3”OD (3R)*
- 4”OD (4R) **
- 5”OD (5R)
- 6”OD (6R)
Thickness :
Mounting :
- Bronze (BRZ)
- Single (SGL)
- Double 180º (D180)
- Double 90º (D90)
- Triple 90º (T90)
- Triple 120º (T120)
- Quad (QD)
Finish :
- Bronze (BRZ)
- White (WHT)
- Silver (SVR)
- Green (GRN)
- Black (BLK)
- Graphite (GPH)
- Custom (CST)
- Marine Grade (MG)
Options :
- Tenon
- 2” 3/8 RND (T2R)
- 3’RND (T3R)
- 3” 1/2RND (T312R)
- 4”1/2RND (T412R)
- GFI Provision ONLY (GFIP)
- GFI KIT (GFIK)
- *Coupling (CPLG)
- *Location @180 opposite to HH
POLE EPA
Maximum EPA (ft) allowance
Height : 10’
- Pole OD : 4” / 5”
- Thickness : 0.125
- 90mph : 8.1 / 15.8
- 100mph : 6.2 / 12.4
- 110mph : 5.7 / 11.6
- 120mph : 4.6 / 9.6
- 130mph : 3.7 / 8.2
Height : 12’
- Pole OD : 4” / 5”
- Thickness : 0.125
- 90mph : 6 / 12 / 18.6
- 100mph : 4.4 / 9.36 / 14.6
- 110mph : 4 / 8.6 / 13.6
- 120mph : 3.1 / 7.2 / 11.2
- 130mph : 2.3 / 6 / 9.5
Height : 14’
- Pole OD : 4” / 5”
- Thickness : 0.125 / 0.188
- 90mph : 4.4 / 9.2 / 14.8
- 100mph : 3.1 / 7 / 11.4
- 110mph : 2.7 / 6.4 / 10.6
- 120mph : 1.9 / 5.2 / 8.85
- 130mph : 1.3 / 4.4 / 7.4
Height : 16’
- Pole OD : 4” / 5” / 6”
- Thickness : 0.125 / 0.188
- 90mph : 3.1 / 7.1 / 11.8 / 25.8
- 100mph : 2 / 5.1 / 9 / 20.6
- 110mph : 1.7 / 4.7 / 8.2 / 19.2
- 120mph : 0.9 / 3.8 / 6.8 / 16
- 130mph : 3.1 / 5.6 / 13.4
Height : 18’
- Pole OD : 5” / 6”
- Thickness : 0.125 / 0.188
- 90mph : 5.4 / 9.2 / 21.6
- 100mph : 3.6 / 6.8 / 17.2
- 110mph : 3.3 / 6.2 / 16
- 120mph : 2.6 / 5.1 / 13.2
- 130mph : 2 / 4.2 / 11.2
Height : 20’
- Pole OD : 5” / 6”
- Thickness : 0.125 / 0.188
- 90mph : 3.8 / 11.6 / 7.2 / 18
- 100mph : 2.3 / 9.2 / 5 / 14.4
- 110mph : 2.1 / 8 / 4.6 / 13.2
- 120mph : 1.5 / 6.9 / 3.7 / 11
- 130mph : 1.1 / 5.7 / 2.9 / 9.2
Height : 25’
- Pole OD : 6”
- Thickness : 0.188
- 90mph : 11.6
- 100mph : 9
- 110mph : 8.4
- 120mph : 6.8
- 130mph : 5.4
SKU: HLCL-RSADB
Min Order Limit:
1
Add a review
Your email address will not be published. Required fields are marked